Decal Application: Video and Written Guides

What you need before you start the application process:

 Decals (Included)

 Solvent and Brush (Included)

 Squeegee (Included)

 Bowl of Water

 Hair Dryer or Heat Gun

 Craft Knife

PREP:

Remove the knobs and thoroughly clean the surface area with soap and water. Finish by wiping down the surface with rubbing alcohol.

TIPS:

The application surface should be as clean and smooth as possible ensuring that it is free of any cooking oil or food.

Old decals can be removed with rubbing alcohol or acetone (fingernail polish remover).

Once the decal has dried and completely cooled down, peel off the final film backing with fingertips, craft knife, or razor blade. Be careful not to scratch the actual decal as the ink is still weak.

Clean off the remaining solvent with a tissue or soft cloth.

If you see any part of the decal not adhering to the appliance and remains stuck to the final layer film. Stop removing the final layer of film. Add a small amount of solvent and re-heat the decal for a longer and/or hotter period of time periodically pressing the decal down with your fingers or squeegee. Wait for it to cool completely and once again slowly remove the final film.

 The decal is a three-layer film free decal, not a sticker, you will be removing two layers when installing.

 Remove old decals with rubbing alcohol or acetone.

 Leaving the decal in water too long can weaken the ink.

 If you have issues transferring the decal, try increasing the heat for a longer period of time.

* The hotter the better

* The longer the better

* Try a heat gun vs. hairdryer

 Heat is the secret to a successful transfer (up to 400 degrees).

 Although it is not required. A heat gun does make the application process much easier and faster compared to a hairdryer. If you or a friend does not own a heat gun. They are relatively inexpensive and can be found on Amazon for under $10.

 The trick to successfully applying the decal is the solvent and the heat. You want the decal to transfer the ink over and bake it into your appliance.

 The ink will seal and become more durable with time.